Garmin G950 Pilot's Manual page 46

SYSTEM OVERVIEW
DISPLAY UNITS
Units in which various quantities are displayed on the G950 screens can be changed on the System Setup
Page.
Changing a display units setting:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired field in the 'Display Units' box.
4) Turn the small FMS Knob to select from a list of measurement units and press the ENT Key when the desired
unit is highlighted.
Category Settings
Navigation Angle Magnetic*
True
Distance and Metric
Speed**
Nautical*
Altitude and Feet*
Vertical Speed
Meters
Temperature Celsius
Fahrenheit*
Fuel and Gallons*
Fuel Flow**
Weight Pounds*
Kilograms
Position HDDD°MM.MM'*
HDDD°MM'SS.S"
* Default setting
** Contact a Garmin-authorized service center to change this setting
34
Affected Quantities
Heading
Course
Bearing
Track
Desired Track
Wind direction (Trip Planning Page)
Crosstrack error (HSI)
Bearing distances (information windows)
DME distance (information window)
Flight plan distances
Map ranges
DIS, GS, TAS, XTK fields (Navigation Status Box)
All distances on MFD
Altitude buffer distance (System Setup)
Arrival Alert trigger distance (System Setup)
All speeds on MFD
All altitudes on MFD
All elevations on MFD
All temperatures on PFD
Total Air Temperature (Trip Planning Page)
Fuel parameters (Trip Planning Page)
N/A
All positions
Table 1-1 Display Units Settings (System Status Page)
Garmin G950 Pilot's Guide for the Tecnam P2006T
Exceptions
Airspeed Indicator
True Airspeed (PFD)
Wind speed vector
Map range (Traffic Page, Terrain
Page)
CDI scaling (System Setup)
Fuel range calculation (EIS)
Altimeter
Vertical Speed Indicator
VNV altitudes (Active Flight Plan)
Engine Indication System (EIS)
Engine Indication System (EIS)
N/A
N/A
190-01146-00 Rev. A