Garmin G950 Pilot's Manual page 33

PFD SOFTKEYS
The CDI, IDENT, TMR/REF, NRST, and ALERTS softkeys undergo a momentary change to black text on
gray background and automatically switch back to white text on black background when selected.
The PFD softkeys provide control over flight management functions, including GPS, NAV, terrain, traffic,
and lightning (optional). Each softkey sublevel has a BACK Softkey which can be selected to return to the
previous level. The ALERTS Softkey is visible at all softkey levels (label changes if messages are issued).
INSET
OFF
DCLTR (3)
TRAFFIC
TOPO
TERRAIN
PFD
DFLTS
WIND
BRG1
HSI FRMT
BRG2
ALT UNIT
STD BARO
190-01146-00 Rev. A
Displays Inset Map in PFD lower left corner
Removes Inset Map
Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Declutters land data
DCLTR-2: Declutters land and SUA data
DCLTR-3: Removes everything except for the active flight plan
Displays traffic information on Inset Map
TRAFFIC: No Traffic displayed on Inset Map
TRFC-1: Traffic displayed on Inset Map
TRFC-2: Traffic Only display shown
Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and elevation
scale on Inset Map
Displays terrain information on Inset Map
Displays second-level softkeys for additional PFD configurations
Resets PFD to default settings, including changing units to standard
Displays softkeys to select wind data parameters
OPTN 1 Displays headwind/tailwind and crosswind arrows with numeric speed components
OPTN 2 Displays wind direction arrow with numeric speed
OPTN 3
Displays wind direction arrow with numeric headwind/tailwind and cross-wind
speed components
OFF
Information not displayed
Cycles the Bearing 1 Information Window through NAV1 or GPS waypoint identifier
and GPS-derived distance information, and ADF/frequency.
Displays the softkeys for selecting the two HSI formats
360 HSI Displays HSI as a 360° compass rose
ARC HSI
Displays HSI as a 140° viewable arc
Cycles the Bearing 2 Information Window through NAV2 or GPS waypoint identifier
and GPS-derived distance information, and ADF/frequency.
Displays softkeys for setting the altimeter and BARO settings to metric units
METERS When enabled, displays altimeter in meters
IN Press to display the BARO setting as inches of mercury
HPA Press to display the BARO setting as hectopacals
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units are selected)
Garmin G950 Pilot's Guide for the Tecnam P2006T
SYSTEM OVERVIEW
21