Machine Without Water Treatment; Machine With Te Or Ve Demineralisation System; Machine With Integrated Softener - Winterhalter UC series Manual

14.2.2 Machine without water treatment

On machine which are operated without water treatment, the symbol opposite can be displayed
at regular intervals as a reminder that descaling has to be performed.

14.2.3 Machine with TE or VE demineralisation system

On machines which are operated with a TE or VE demineralisation system, you can set the
quantity of water which, once consumed, causes the symbol opposite to be displayed.

14.2.4 Machine with integrated softener

On machine which are operated with an integrated softener, the total hardness of the raw water has to be
entered in °dH (German degree of hardness).
The following formulae may be used to convert other degrees of hardness into °dH:
− English degree of hardness to German: 1°e = 0.798°dH
− French degree of hardness to German: 1°f = 0.56°dH
− Quantity of alkaline-earth ions to Garman degree of hardness: 1 mmol/l = 5.6°dH
Use parameter P 597 to set a value in hours (= operating hours). The
symbol shown above appears after the set time has elapsed.
Screen 14
Save.
Save parameter P 596 a "0" if you do not want the symbol shown
above to appear.
Screen 14
Use parameter P 511 to set the quantity of water in m
place. The symbol shown above appears after the set quantity has
elapsed.
Screen 14
Save.
Use parameter P 505 to set the total hardness of the raw water in °dH
(German degree of hardness).
Screen 14
Save.
Manual entries
3
with a decimal
19