Working With The Food Processor - Silvercrest SKM 500 B1 Operating Instructions Manual

Working with the food processor

You can shred, grate or cut using the three disks
1) Select the required disk and assemble everything as described in the chapter
"Assembly".
2) Remove the pusher
3) Cut the food into pieces that will easily fit into the filling shaft
4) Start the food processor at setting 1 by turning the speed regulator
5) Then gradually add the food. Push the food in using the pusher
applying pressure.
Do not exceed the quantities specified in the following table.
INGREDIENT
Apples/carrots
Parmesan
Cucumber
Potatoes
Onions
Chocolate
Hard cheese
(e.g. mature
Gouda)
NOTE
► Do not prepare large quantities all at once, but in several portions. Empty
the mixing bowl
► Do not allow the appliance to operate for long periods when chopping
(hard) cheese or chocolate. Otherwise the ingredients will become too hot,
start to melt and agglutinate.
SKM 500 B1
from the filling shaft
SHREDDING DISK
max. 500 g
max. 200 g
-
max. 500 g
-
-
max. 300 g
each time.
.
CUTTING DISK
max. 500 g
-
max. 2
max. 500 g
max. 300 g
-
-
of the food processor.
.
.
without
GRATING DISK
-
max. 200 g
-
max. 500 g
-
max. 200 g
-
15
GB