Mixing Bowl With Food Processor - Silvercrest SKM 500 B1 Operating Instructions Manual

Mixing bowl with food processor

NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Fit the drive shaft
2) Place the mixing bowl
pointing at the symbol
is pointing at the symbol
3) Select a suitable disk
and insert it into the disk adapter
–
–
Fig. 1
4) Place the disk adapter
5) Put the lid
points to the symbol
audible "click" is heard and the arrow is pointing to the symbol
SKM 500 B1
to the shaft holder.
onto the motor block
and rotate the mixing bowl
if a different disk is still installed: Press the metal tab of the disk outwards
so that it slides over the locking mechanism on the disk adapter
can now remove the disk.
insert the new disk with the narrower side first into the recess in the
disk adapter (Fig. 1) and push the disk firmly downwards so that it
engages and is firmly seated (Fig. 2).
with the disk fitted onto the drive shaft
onto the mixing bowl
so that the arrow
. The mixing bowl is now fixed.
(see chapter "Working with the food processor")
:
Fig. 2
so that the arrow
on the mixing bowl . Then rotate it until an
is
until the arrow
. You
.
on the lid
.
9
GB