Table of Contents
Advertisement
Problem
The display switches
to the TV when the
main unit is played
back.
When the power of the
TV is turned off, the
power of the main unit
is also turned off.
The main unit is
activated
automatically when
operating TV remote
control.
"PIN CODE" appears
on the TV screen when
the disc is inserted and
ask your PIN code.
If this system does not work properly despite the above "Possible solution"
Many functions of this system are controlled by microprocessors that can be reset by recycling the power
supply. If pressing any button does not result in the normal action, disconnect the power cable from the outlet,
wait for a while, and connect the power cable again.
Possible cause
This is due to the activation of
the HDMI CEC control
function.
PIN code has been set to the
disc.
Possible solution
To deactivate this function, set the
"CONTROL WITH HDMI" of the "HDMI
SETTING" in the CONNECTION
SETTING menu to OFF.
Enter 4 digit PIN code of the disc to
playback.
Reference
page
53, 61
-
72
Hide quick links:
Advertisement
Table of Contents
