Playing Back A File - JVC CA-NXBD3 Instruction

M
;
o
FL DISPLAY
CAUTION
Slide the remote control mode selector
to [AUDIO].

Playing back a file

MP3
A AUDIO
This part explains playing back 1) files recorded on
the loaded disc, and 2) files recorded on an SD card
inserted to the main unit. The operation is explained
SD
with a display of MP3 files as an example.
1
Remote
control
mode
When you want to play back files on a disc
selector
Place a disc on the disc tray.
• Refer to steps 1 and 2 on page 13.
When you want to play back files on an SD card
Insert the SD card to the [SD] slot on the
front of the main unit.
Printed
surface
NOTE
• The SD card will only function when the cover is
closed.
The following SD cards can be used on the main unit.
SD Memory Card
(from 8 MB to 2 GB)
SDHC Memory Card
(from 4 GB to 32 GB)
• miniSD™ and microSD™ card requires a miniSD™
and microSD™ card adaptor.
• Copyrighted files cannot be played back.
• This system cannot recognize SD cards with a
rating that exceeds 5 V/500 mA.
• Before inserting an SD card, refer also to its
manual.
• Before disconnecting the SD card, make sure that
playback is stopped.
2
NOTE
• You can also use the buttons on the main unit. You
can also select "SD" as the source by repeatedly
pressing [SOURCE], followed by pressing [;] to
start playback.
• If you select another source while "READING" is
displayed in the display window, sound is not
produced until reading of the files is completed.
3
WMA WAV JPEG MPEG4 AVC AVCHD
Prepare the system for file playback
by following the operations below.
The cut-off corner
is on the right
Type of Media
MP3, WMA, WAV, JPEG,
MPEG4 AVC, AVCHD
Press [;] or [SD].
Press [o] to stop playback.
• The menu screen appears on the TV screen.
(Continued on the next page.)
ADAPTER ADAPTER
Format
16