Resuming Playback - JVC CA-NXBD3 Instruction

DISC
;
o
CAUTION
Slide the remote control mode selector
to [AUDIO].

Resuming playback

BD-V
A AUDIO
When playback is stopped in the middle, playback
can be started from the stopped position.
Temporarily stopping playback
Remote
When a disc/file is played back, follow any of
control
mode
the operations below.
selector
Press [o] once.*1
Press [A AUDIO] to turn off the main unit.
*1 "RESUME" is displayed in the display window.
After this operation, the position where playback
has been stopped is stored even when the main
unit is turned off by pressing [A AUDIO].
Starting playback from the stored
position
When "RESUME" is displayed in the display
window after pressing [o].
Press
When the main unit is turned off after pressing
[A AUDIO].
Press [DISC].
NOTE
• This function does not work in program playback or
random playback.
• You can deactivate the resume playback function.
(Refer to "RESUME" on page 56)
• The resume playback funtion does not work if the
source is changed or the unit is turned off when the
source is NETWORK or SD.
Clearing the stored position
Press [o] twice.
NOTE
• The stored position is also cleared if the disc tray is
opened.
BD-AV DVD-V DVD-VR CD SD
.
[;]
AVCHD
32