Video Setting - JVC CA-NXBD3 Instruction

VIDEO SETTING

You can change the video settings during playback.
To open the PB MODE menu screen
1
Press [PB MODE].
2
Use [J / K / H / I] and [ENTER] to
control the preference screen.
• Proceed according to the procedure described
on the TV screen.
Items Contents (
PICTURE
NORMAL
QUALITY CINEMA
FINE
BD-V BD-AV DVD-V SOFT
DVD-VR SD AVCHD USER SETTING
DIGITAL NOISE
ON
REDUCTION OFF
BD-V BD-AV DVD-V
DVD-VR SD AVCHD
PROGRESSIVE
AUTO1
OUTPUT Automatically recognizes the film
and video component and
BD-V BD-AV DVD-V converts appropriately.
DVD-VR SD AVCHD
AUTO2:
Supports progressive video
recorded in 30 frames/second in
addition to AUTO1.
VIDEO:
When shaking occurs in AUTO1
or AUTO2 (conversion
appropriate to the video
component)
DETAIL CONTRAST:
Controls the contrast of the
SETTING*1
display.
BRIGHTNESS:
BD-V BD-AV DVD-V
Controls the brightness of the
DVD-VR SD AVCHD
display.
SHARPNESS:
Controls the sharpness of the
display.
COLOR:
Adjusts only the contrasting
density of the color.
GAMMA:
Adjusts the brightness of dark
portions of the screen.
3DNR:
Controls the noise of the display.
*1. Displayed only when "PICTURE QUALITY" is
set to "USER SETTING".
To close the PB MODE menu screen
Press [PB MODE].
: initial setting)
:
PICTURE QUALITY
You can change the picture quality settings during
playback.
Select "PICTURE QUALITY" using [J /
K] then press [ENTER].
VIDEO SETTING
PICTURE QUALITY
DIGITAL NOISE REDUCTION
PROGRESSIVE OUTPUT
DIGITAL NOISE REDUCTION
Reduces noise in the video image during playback.
This is useful when recording video in the long
duration mode.
Select "DIGITAL NOISE REDUCTION"
using [J / K] then press [ENTER].
VIDEO SETTING
PICTURE QUALITY
DIGITAL NOISE REDUCTION
PROGRESSIVE OUTPUT
(Continued on the next page.)
CINEMA
ON
VIDEO
CINEMA
ON
VIDEO
46