JVC CA-NXBD3 Instruction page 70

Manufacturer codes for STBs
Examples:
For an Amstrad STB: Press [0], then [3].
For a Triax STB: Press [3], then [0].
When the manufacturer of your STB has 2 or more
codes, select the manufacturer codes in turn and find
the one that enables the STB and remote control to
operate properly.
Manufacturer Code
JVC 01, 02
Amstrad 03, 04, 05,
06, 31
BT 01
Canal+ 20
Canal 20
Satellite
D-Box 24
Echostar 17, 18, 19,
21
Finlux 11
Force 28
Galaxis 27
Grundig 07, 08
Hirschmann 07, 17, 37
ITT Nokia 11
Jerrold 16
Kathrein 13, 14, 34
Luxor 11
6
Release [STB/VCR A].
NOTE
• Manufacturer codes are subject to change without
notice. You may not be able to operate the STB/
VCR produced by the manufacturer.
• After replacing the batteries of the remote control,
set the manufacturer code again.
65
Manufacturer Code
Mascom 32
Maspro 13
Nokia 24, 26, 33
Pace 10, 25, 31
Panasonic 15
Philips 09, 23
Saba 35
Sagem 22, 29
Salora 11
Selector 29
Skymaster 12, 36
Thomson 35
TPS 22
Triax 30
Wisi 07
Using the remote control for the
STB/VCR operation
Before the STB/VCR operation, select the remote
control mode for the STB/VCR.
1
Slide the remote control
mode selector to [STB/
VCR].
2
Press [STB] or [VCR].
• Operate the remote control by
pointing it at the STB/VCR.
Remote control button assigned for the STB
operation
Remote control button
[STB/VCR A]
[STB]
[CH +/-]
[the number buttons]
(1-9, 0)
Remote control button assigned for the VCR
operation
Remote control button
[STB/VCR A]
[VCR]
[CH +/-]
[the number buttons]
(1-9, 0)
[;]
[o]
[W]
[N]
[O]
[REC w] + [;]
[REC w] + [W]
NOTE
• When the remote control mode selector is slid to
[STB/VCR], some buttons may not work.
Usage
Turns on/off the STB.
Selects the STB control
mode.
Changes channels.
Selects the channels.
Usage
Turns on/off the VCR.
Selects the VCR control
mode.
Changes channels.
Selects the channels.
Starts playback.
Stops playback.
Pauses playback.
Fast-forwards the tape.
Fast-rewinds the tape.
Starts recording.
Pauses recording.