Component Output - JVC CA-NXBD3 Instruction

MONITOR TYPE
You can specify the monitor type according to the TV
that is connected.
Select "MONITOR TYPE" using [J / K]
then press [ENTER].
CONNECTION SETTING
MONITOR TYPE

COMPONENT OUTPUT

HDMI SETTING
EXIT
SELECT
SET UP
• Select the display method suitable for your TV.
When connected to a 16:9 widescreen television.
16:9:
Use this setting when
displaying normal video
signals on a wide-screen TV.
(Images will be displayed in
16:9 format by adding black
panels to 4:3 format.)
16:9FULL:
For an ordinary wide TV.
(Image will be displayed in
16:9 format by enlarging 4:3
format.)
When connected to a 4:3 aspect television.
4:3 PAN&SCAN:
For a TV with conventional
4:3 aspect ratio.
(Image will be displayed in 4:3
format by dipping both sides
of 16:9 format.)
4:3 LETTERBOX:
For a TV with conventional
4:3 aspect ratio.
(Image will be displayed in 4:3
format by adding black
panels to 16:9 format.)
16:9
576i
ENTER
RETURN
COMPONENT OUTPUT
You can configure the video output when connected
to a component terminal.
Select "COMPONENT OUTPUT" using
[J / K] then press [ENTER].
CONNECTION SETTING
MONITOR TYPE
COMPONENT OUTPUT
HDMI SETTING
EXIT
SELECT
SET UP
• Even if you select "720P" or "1080I", images are
output in 576p when you play a DVD VIDEO disc.
HDMI SETTING
You can perform various settings when connected to
the HDMI terminal.
Select "HDMI SETTING" using [J / K]
then press [ENTER].
CONNECTION SETTING
>HDMI SETTING
HDMI VIDEO MODE
HDMI OUTPUT
24p OUTPUT
x.v.Color
Deep Color
HDMI ENHANCE SETTING
HDMI AUDIO OUTPUT
CONTROL WITH HDMI
EXIT
SELECT
SET UP
NOTE
Depending on the conditions (monitor type 16:9,
resolution 720p and above, aspect 4:3), some of the
OSD display of the component output may be cut off.
In this case, set "HDMI VIDEO MODE" to "OFF".
OSD of the composite output may be cut off with the
above conditions even when OFF is selected. In this
case, set the component resolution to 576p or below,
or set the monitor type to other settings except 16:9.
(Continued on the next page.)
16:9
576i
ENTER
RETURN
ON
AUTO
OFF
AUTO
OFF
STANDARD
OFF
ON1
ENTER
RETURN
54