Quantum Tape Drive Scalar 50 Installation Instructions Manual page 22

Quantum Scalar 50 Tape Drive Installation Instructions
Document 81-81769-01 B01
September 2007
Figure 23 Port
Configuration Screen
22
To display the SCSI ID assignments:
1 From the SANblade manager program, click
The port configuration screen displays (see
The port configuration screen allows you to change the SCSI ID order if
the Fibre Channel HBA drive supports persistent bindings.
Click on the drop down ID box to change the SCSI ID assignment as
desired.
Fibre Channel Connectivity Troubleshooting
.
Configure
figure 23).
SCSI ID
assignment