Troubleshooting - Sirius XM RAdio MiRGE User Manual

Hide thumbs Also See for MiRGE:
Table of Contents

Advertisement

Troubleshooting

If this happens
My radio is not receiving a signal.
My radio will not turn on.
I'm only receiving a couple channels on
SIRIUS and XM
The radio and Sound System are on and
receiving a signal but I can't hear anything.
I hear noise or interference.
My remote doesn't work.
The minimum volume level is too loud or the
maximum volume is too quiet.
Try this
Use the "antenna aiming" feature on the radio
and move the antenna to another location.
Check whether the power cord is plugged into
the wall.
If applicable, make sure Auto-ON is enabled.
Gradient consists of 3 colors:
Gradient consists of 3 colors:
Make sure your radio is activated. Visit
www.sirius.com/mirge or call 1.888.539.SIRIUS (7474)
Light Blue: C100 M56 Y0 K0
Light Blue: C100 M56 Y0 K0
Remove the radio from the Sound System and
re-insert it, then turn the power on.
Dark Blue: C100 M38 Y0 K64
Dark Blue: C100 M38 Y0 K64
Unplug any headphones.
Rich Black: C50 M40 Y40 K100
Rich Black: C50 M40 Y40 K100
Check the volume control.
Make sure mute is not set on the remote if
used.
Make sure aux mode is o .
Move away from any cordless telephones or
electrical appliances or other devices that may
cause interference.
Make sure that the IR sensors are not obstructed
It may be time to replace the battery in the
remote.
Adjust the line out level on your radio.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxmir1tk1

Table of Contents