Table of Contents
Advertisement
5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5.6 FTP Commands
5.6.1 File designation method
5 - 16
The FTP operation commands on the FTP client side (external devices) supported by
the Ethernet module FTP server are described.
The file designation method in the FTP operation command from the FTP client side is
explained.
Designation descriptions
' ' : The part with the single quotation mark ' ' indicates one argument.
[
] : The part with the brackets [
(1) Password
If a password is registered in the target file for file transfer, the password must be
set in the Ethernet module prior to file transfer.
See the "quote keyword-set" command in Section 5.6.4.
(2) File path
(a) The QCPU designates the file by differentiating the drive name and file
name.
(b) When designating a file in the QCPU using the FTP functions, designate the
file in the following manner:
[ Designation format ]
[ Designation example ]
[ Designation details ]
Drive name
No designation
0
1
2
3
4
] indicates that it is optional.
['drive name': \ ] 'file name' . 'extension'
0:\MAINSEQ1.QPG
1) Drive name (drive No.)
• Designates the drive name for the memory used for file
transfer.
• The relationships between the QCPU memory used
and drive name are as follows.
Parameter valid drive designated with DIP switches
QCPU built-in program memory
Memory card (RAM) · · · · · SRAM card
Memory card (ROM) · · · · · Flash card, ATA card
QCPU built-in standard RAM
QCPU built-in standard ROM
MELSEC-Q
Extension (identifier)
File name
Drive name
(drive No.)
Memory used
5 - 16
Advertisement
Table of Contents
