Additional Functions In Function Version B Or Later - Mitsubishi QJ71E71-100 User Manual

1 OVERVIEW

1.2 Additional Functions in Function Version B or Later

Function
Sending files in CSV
format as attachment
Sending main text
When using
the e-mail
function
Support for encoding/
decoding
Remote password
When using
check
the file transfer
(FTP server)
Support for multiple
function
CPU systems
Function
Specifying target station's CPU type in
data link instructions
1 - 4
The following table lists the functions additionally provided for the Ethernet modules of
function version B or later.
For the function version, serial No., software version of the Ethernet modules and
related products (i.e. CPU module, GX Developer) supporting the additional functions,
refer to the User's Manual (Basic), Section 2.7.
For comparison by function versions of the Ethernet module, refer to the User's
Manual (Basic), Appendix 1.1.
(1) Functions added for function version B
Sends a file in CSV format as attachment to e-mail from the
Ethernet module.
Sends main text of up to 960 words from the Ethernet
module.
The following encoding/decoding is supported.
• Encode the Subject using 7 bits encoding and send it from
the Ethernet module.
• Decode and receive an e-mail encoded with Quoted
Printable by the Ethernet module.
Unlocks/locks the remote password of the QCPU. The
unlock processing enables access to the QCPU using FTP
commands.
The QCPU transfers files to the control PLC/non-control
PLC of the Ethernet module when a multiple CPU system
configuration is used.
(2) Function added for function version D
In the following data link instructions, the target station's
CPU type can be specified ((S1)+3). (Specification of
control/standby system or system A/B in the redundant
system is available.)
• READ/SREAD instruction
• WRITE/SWRITE instruction
• REQ instruction
Overview
Overview
MELSEC-Q
Reference
section
Chapter 2
Chapter 5
Reference
section
Chapter 4
Chapter 6
1 - 4