Table of Contents
Advertisement
2 USING THE E-MAIL FUNCTION
2.9.2 Receiving a news e-mail
No.
"
··· "
Send destination No.
CPU module status
At normal
During RUN
At module warning occurrence "Status : RUN (Warning)" or "Status : RUN (Slight Abnormal)"
At normal
At module warning occurrence "Status : STOP (Warning)" or "Status : STOP (Slight Abnormal)"
During STOP
During the module error or
module system error
During PAUSE
2 - 36
The designated external device side can open the news e-mail from the Ethernet
module in the same way as opening a mail received from the PLC CPU.
(1) When monitoring the CPU status
(a) When the result of the CPU status monitoring matches the monitoring
condition, the Subject will be sent. The attached file or main text will not be
sent.
(b)
The following shows the contents for the Subject sent.
"
··· " Status
(Send contents of the parts for the status)
—
(2) When monitoring a device
(a)
Once any of the results of the device monitoring matches the monitoring
condition among the devices having the conditions designated on the
"Ethernet news setting" screen, the Subject and attached file, or the Subject
and main text will be sent.
(b)
The following shows the contents for the Subject sent.
No. "
··· "
(C)
All device values for the number of registered points designated on the
"Ethernet news setting" screen are recorded in the attached file or main
text.
The size of the data recorded in the attached file or main text is calculated
as follows:
Registered points (number of bits) ÷ 16
Information of word devices:
Registered points (number of devices)
" ··· " Time "yyyy/mm/dd hh:mm:ss"
CPU model name
"Status : RUN"
"Status : STOP"
"Status : STOP (Serious/Fatal Error)" or "Status : STOP (Abnormal)"
"Status : PAUSE"
"
" = "
··· " · · ·
Monitoring
value
Condition match device
Send destination No.
(Round up to a whole number)
MELSEC-Q
Status
Send contents
Condition match device
for condition mached,
monitoring value
2 bytes
2 bytes
Detection time
2 - 36
Advertisement
Table of Contents
