Accessories And Replacement Parts - Vega VEGAWELL 52 Operating Instructions Manual

Storage
Storage and transport
temperature
Lifting and carrying
VEGABOX 03
VEGADIS 82
Measuring instrument
holder
Mounting bracket
VEGAWELL 52 • 4 ... 20 mA
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 ... 85 %
With an instrument weight of more than 18 kg (39.68 lbs) suitable and
approved equipment must be used for lifting and carrying.
3.5

Accessories and replacement parts

The VEGABOX 03 is a breather housing for VEGAWELL 52. The
housing contains a filter element for ventilation.
You can find further information in the operating instructions "Breather
housing with ventilation filter" (Document-ID 45925).
The VEGADIS 82 is suitable for measured value indication of
4 ... 20 mA sensors. It is looped into the signal cable.
You can find further information in the operating instructions
"VEGADIS 82" (Document-ID 46591).
The measuring instrument holder is used for wall/tube mounting of
VEGABAR series 80 pressure transmitters and VEGAWELL 52 sub-
mersible pressure transmitters. Supplied reducers enable the adapta-
tion to different instrument diameters. The material used is 316L.
You can find additional information in the operating instructions
"Mounting accessory pressure" (Document-ID 43478).
The robust, heavy-duty bracket of 1.4301/304 is designed for wall
mounting VEGA instruments. The required fastening elements are
included in the shipment.
3 Product description
11