Hollywood Racks HR135 Assembly And Use Instructions

Tow ‘n go hitch rack. for 2 inch hitches only

Assembly and Use Instructions for Traveler Style Tow 'n Go Hitch Rack

Drive slowly when using the rack on bumpy or dirt roads.



Check the rack bikes and straps regularly during use.

If you have any questions or installation problems, please see your Hollywood Racks retailer or



contact Hollywood Racks at 800-747-4085.

Class III Hitch Required if you tow and carry bikes at the same time. A

longer hitch ball mount may be required for use of this product. (Tow N' Go

requires 3" of space on your hitch ball mount insert tube)

Note: This product not to be used on the back of trailers!

Tow 'n Go Hitch Rack

Model HR135

For 2" hitches only

Table of Contents

Need help?

Do you have a question about the HR135 and is the answer not in the manual?

Page 1   Check the rack bikes and straps regularly during use. If you have any questions or installation problems, please see your Hollywood Racks retailer or  contact Hollywood Racks at 800-747-4085. Class III Hitch Required if you tow and carry bikes at the same time. A longer hitch ball mount may be required for use of this product.
Page 2 2009 version Description Tow ‘n Go bike rack with Tie Down strap attached to rack Rubber Bike Cradle straps Allen wrench for set screws Fig. 1 Installation Instructions: 1. Install your trailer hitch receiver tube through the base of the rack (at the bottom of the main beam.
Page 3 2006 through 2008 version After opening the Tow N’ Go box, FIG. A: Black threaded knob you should have the following parts: and spacer block 1. Parts bag including: a. Two black threaded knobs b. Two pivoting spacer blocks c. Allen wrench for set screws. 2.
Page 4 Installation of bikes – all versions For ease of installation, we suggest you put the larger bikes on the inside (closest to vehicle), smaller frames or kids bikes on the outside. The first bike loaded should have the handlebars facing towards the driver’s side of the vehicle.
Page 5 (at its option) a defective part or the complete rack without charge for labor or parts. Hollywood Racks may elect (at its option) to issue a refund equal to the purchase price paid for the product.