Reversing The Door Swing - Kenwood KFC60B15 Installation Instructions Manual

60cm frost free
Table of Contents



reversing the door swing

tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit
on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
1. Remove all fridge door shelves from the
upper door. Remove the upper cover,
upper corner cover and upper door corner
Upper corner cover has left and right
side. There is the letter "L" and "R"
at the back to identify which side it
belongs to. The upper corner cover
packed as an accessory is for the
right side.
2. Remove the upper hinge cover, screws
and upper hinge. Lift the upper door and
place it on a padded surface to prevent
from being scratched.
Upper hinge cover has left and right
side. The upper hinge cover packed
as an accessory is for the left side.
3. Remove the stopper from the bottom of
the upper door and move it to the opposite
side. Screw tightly. Remove also the upper
door stop block. For the opposite side, use
another stop block and screw tightly.
Upper door stop block has left and
right side. The upper door stop block
packed as an accessory is for the
left side.

Hide quick links:


Table of Contents

Table of Contents