Installing The Door Handle; Reversing The Door Swing - Kenwood KUF55X18 Installation Instructions Manual

installation

installing the door handle

1. Remove the screws from the door.
2. Take the door handle and remove the 2 handle screw
hole covers from the door handle. Align the door
handle with the screw holes on the door and screw
tightly. Replace the 2 handle screw hole covers on the
door handle.

reversing the door swing

tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit
on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
7