Kenwood KFC60B15 Installation Instructions Manual page 10

60cm frost free
Table of Contents

Advertisement

installation
8. Screw the levelling feet fix board, bottom
hinge and levelling feet tightly on their new
position.
9. Stand the unit. Remove the middle hinge
hole covers and swap their position with the
middle hinge. Reverse the middle hinge.
10. Place the bottom hole of the lower door onto
the bottom hinge pin. Insert the middle hinge
pin into the upper hole of the lower door.
Tighten the pin securely. Screw the middle
hinge tightly. Cover the remaining holes with
the hole covers.
• Ensure the lower door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the pin.
11. Move the magnet cord to the opposite side.
Reverse the upper hinge. Place the bottom
hole of the upper door onto the middle
hinge pin. Insert the upper hinge pin into the
upper hole of the upper door. Tighten the
pin securely. Screw the upper hinge tightly.
Cover the upper hinge with the upper hinge
cover.
• Ensure the upper door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the pin.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents