3. Cut is executed and the remaining data
in the sequence are shifted.
NOTE.
Cut data is placed in the clipboard.
Deleted data is removed from the sequence
and cannot be recovered.
4. Clear initializes the data of selected
waveform(s) or element(s). A cleared
cell becomes Empty.
5. Use Insert Waveform to insert a
waveform from the Waveform List.
6. You can use Paste-Insert or
Paste-Replace when you want to
set a waveform after copying any
waveform in the Sequence window.
AWG5000 and AWG7000 Series Quick Start User Manual
Sequence
75