Tektronix AWG7082C Quick Start Manual page 100

8. The copied waveform is pasted to
index 2.
9. Click the Switch to Table icon to change
the display to Tabular view.
10. Set the following sequence parameters:
Index 1: Wait Trigger On
The sequence waits for a trigger
before generating the first element.
Index 2: Repeat count Infinite
The sequence infinitely generates
the Sine-1 waveform until an event
occurs.
Index 2: Event Jump To Next
When the instrument receives an
event signal, the sequence jumps to
next element.
Index 3: Repeat count 1000
The sequence repeats the
*Triangle960 waveform 1000
times.
Index 4: Go To 1
The sequence jumps to index
number 1 after generating index
number 4 waveform.
11. Click the Run button to confirm that the
sequence works properly. The animation
window next to the Run button will be
activated when the instrument is in the
running state.
AWG5000 and AWG7000 Series Quick Start User Manual
Tutorials
83