Offset.
You can add constants to the specified range of analog data using Offset from the Edit menu.
1. Offset can be set by voltage or
normalized value.
2. Use this dialog box to change the Item or
Range. (See page 58, Item and Range.)
Invert.
Data values in the specified range can be inverted using Invert from the Edit menu.
1. For analog data, a positive value will
become negative. For marker data, low
(0) becomes high (1).
Use this dialog box to change the Item or
Range. (See page 58, Item and Range.)
AWG5000 and AWG7000 Series Quick Start User Manual
Waveform Display and Edit
63