Tektronix AWG7082C Quick Start Manual page 71

Waveform Display and Edit
6. Use Level to set parameters for
Amplitude/Offset or High/Low.
7. Use Option to select the amplitude/
offset settings. This frame is displayed
when you set the vertical units to Voltage.
If you set the vertical units to Normalized
Value, this frame is disabled. (See
page 29, Changing the Windows Display
Style.)
8. Select an edit action in the Operation
frame.
Set to – Specifies the channel
and index number. The created
waveform is assigned to the specified
position.
Insert before – The created
waveform is inserted before the
specified cell of the sequence. When
this command is executed, the
remaining data is shifted. When the
Run mode is non-sequence, this
parameter is disabled.
Create Only – Creates a new
waveform, but the waveform is not
loaded. Enter the waveform name
in the Waveform Name box. The
created waveform is listed in the
Waveform List window.
Overwrite – Specified existing
waveform data is overwritten. When
you select Overwrite, a waveform
currently being loaded is displayed in
the Target Waveform Name box. The
Waveform Name box is disabled.
9. Click Execute to create a waveform.
Quick Tip
Use Create Digital Pattern to create digital patterns in a similar manner as creating Analog waveforms.
54 AWG5000 and AWG7000 Series Quick Start User Manual