Tektronix AWG7082C Quick Start Manual page 83

Waveform Display and Edit
User Defined.
You can fill the specified range of waveform data with a selected digital pattern using User Defined from the
Edit > Modify Pattern menu.
1. Select Binary or Hex for the pattern.
2. Enter a pattern directly, or load a text
file from the internal hard drive or an
external memory device.
The maximum length of a bit pattern is
1000 (250 Hex characters).
3. Change the Level parameters, if needed.
4. Select the Item and Range.
If multiple items are specified as the
target, the same data is created for all
items.
Clock.
You can fill a specified range of data with a clock pattern using Clock from the Edit > Modify Pattern menu.
1. Select the Start Level.
2. Enter the values for Low Step and High
Step.
3. Change the Level parameters, if needed.
4. Select the Item and Range.
66 AWG5000 and AWG7000 Series Quick Start User Manual