Canon ME20F-SHN Button Operation Manual page 8

Showing Onscreen Displays
Left side and center of the screen
Display
ABCDEFGHIJKLMNOP
AF
CP1 to CP4, EOS, WDR, C.Log, Blue,
Green, Crisp
8
Temp. (in red)
Fan (in red)
Lens (in red)
AWB, WB-A, WB-B, Dylt, Tung, Kelv
00000K, ±0
Auto, Tv, Av, AGC, Manual
F0.0, Clsd
00.0dB
Right side of the screen
Display
Date/time
Rec
1/0000
ND Off, ND 1/8, ND 1/64
IR
NOTES
• Press the CANCEL button to stop showing the camera's onscreen displays on the shooting screen; press the
button again to show all onscreen displays again.
• For external monitors that support only 480P or 576P input, connect the camera using the HDMI OUT
teminal.
• When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video signal.
Description
Camera name (A 40).
Autofocus operation (one-shot AF, A 22).
Currently selected custom picture file (A 29).
Temperature warning (A 42).
Fan warning (A 42).
Lens error warning (A 42).
White balance (A 19).
Camera mode (A 11).
Aperture value (A 13).
• Grayed out when the camera mode is set to [Tv]; not displayed when it is
set to [Auto].
• [Clsd] (fully closed iris) appears only when a compatible EF Cinema lens
(A Setup Guide) is attached to the camera.
Gain value (A 16).
• Grayed out when the camera mode is set to [Tv], [Av] or [AGC]; not
displayed when it is set to [Auto].
Description
Date and time.
Recording command being output to an external recorder
(A Setup Guide).
Shutter speed (A 17).
• Grayed out when the camera mode is set to [Av]; not displayed when it
is set to [Auto].
ND filter setting (A 18).
• Grayed out when the camera mode is set to a mode other than [Manual]
and the ND mode is set to [Automatic]. Not displayed when the camera
mode is set to [Auto] and the ND mode is set to [Automatic].
Infrared mode (A 26).
Custom Display
[Camera Name]
–
[Custom Picture]
[Temperature Warning]
–
[Lens Error]
[White Balance]
[Camera Mode]
[Iris]
[Gain]
Custom Display
[Date/Time]
–
[Shutter Speed]
[ND Filter/Infrared]
[ND Filter/Infrared]