Table of Contents
Advertisement
Custom Picture Settings
[Black Gamma]
Raises or lowers the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to [Wide
DR] or [Canon Log], this setting has no effect on the picture. This setting can be adjusted from –50 to +50.
(Default: ±0)
32
[Knee]
Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can
prevent parts of the image from being overexposed. When [Gamma] is set to [EOS Std.], [Wide DR], [Canon
Log], or [Crisp Img], this setting has no effect on the picture.
[Activate]: Activates/deactivates the setting. (Default: [On])
[Slope]:
Determines the slope of the gamma curve above the knee point. This setting can be adjusted from
–35 to +50. (Default: ±0)
[Point]:
Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109. (Default: 95)
Slope
[Sharpness]
Sets the sharpness level. This setting can be adjusted from –10 to +50. (Default: ±0)
[Noise Reduction]
Reduces the amount of noise that appears in the image. Select a level from 1 (lowest level) to 12 (highest
level), or select [Off ] to turn the noise reduction off. (Default: [Off ])
Black Gamma
Input
Input
Level
Point
Input
Advertisement
Table of Contents
