Table of Contents
Advertisement
Custom Picture Settings
The camera lets you change several settings (A 31) that control various aspects of the image produced. As a
set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 4 custom picture files in the camera and load them later to apply exactly the
same settings. Alternatively, you can use one of the preset custom picture files.
Selecting Custom Picture Files
Select a custom picture file to apply its settings while shooting or to
edit it.
1 Open the custom picture file's [Select File] screen.
[Custom Picture] > [Select File]
2 Push the joystick up/down to select the desired file and
then press SET.
• Select one of the custom picture files saved in the camera
([CP1] to [CP4], [EOS Std.], [Wide DR], [Canon Log], [Blue Scr], [Green Scr], [Crisp Img]).
• When you close the menu, the selected custom picture file's settings will be applied.
Preset Custom Picture Files
The following preset custom picture files are protected and cannot be edited.
[EOS Std.]:
Reproduces the image quality and look (vivid, sharp and crisp) of an EOS digital SLR
camera with its picture style set to [Standard].
[Wide DR]:
Applies a gamma curve with a very wide dynamic range and an appropriate color
matrix that nevertheless do not require post-production processing.
[Canon Log]:
Uses the Canon Log gamma and color matrix for an outstanding dynamic range
and an image suitable for processing in post-production.
[Blue Scr], [Green Scr]: Settings that optimize the color correction for chroma key systems (blue screen or
green screen, respectively) that use LED lights and retro-reflective backdrops. They
can also be used for chroma key shooting with common blue or green backdrops.
[Crisp Img]:
Under sufficient light conditions, video becomes clear with high sharpness applied.
Under low-light conditions, the data size can be reduced by setting the noise
reduction to a high level. Setting suitable for transmitting the video over the
network.
NOTES
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- You can press the remote controller's CUSTOM PICT. button to open the [Custom Picture] submenu.
- Adjusting custom picture related settings using the remote controller will change the settings registered
under the currently selected custom picture file.
- If a preset custom picture file is selected, custom picture settings cannot be changed using the remote
controller.
• If you set an assignable button to [Custom Picture] (A 27), you can press the button to open the [Custom
Picture] submenu.
Custom Picture Settings
[Custom Picture]
[Select File]
[Crisp Img]
29
Advertisement
Table of Contents
