Table of Contents
Advertisement
NOTES
• If you set an assignable button to [AE Shift +] or [AE Shift –] (A 27), you can press the button to adjust the
AE shift level.
• You cannot use push auto iris and adjust the AE shift level at the same time.
Light Metering Mode
Select the light metering mode to match the shooting conditions. Using the appropriate setting will produce
a suitable exposure level during automatic exposure (camera modes other than [Manual], or while using push
auto iris with the camera mode set to [Manual]).
1 Open the [Light Metering] submenu.
[Camera Setup] > [Light Metering]
2 Select the desired option and then press SET.
Options
[Backlight]: Suitable when shooting backlit scenes.
[Standard]: Averages the light metered from the entire screen, giving more weight to the subject in the
center.
[Spotlight]: Use this option when shooting a scene in which only a certain part of the picture is lit, for
example, when the subject is lit by a spotlight.
NOTES
• When the camera mode is set to [Manual], changing the light metering mode will not affect the exposure.
Adjust the exposure manually to a suitable level.
Adjusting the Aperture
[Camera Setup]
[Light Metering]
[Standard]
15
Advertisement
Table of Contents
