Table of Contents
Advertisement
Aspect Markers
The camera offers the following onscreen markers that indicate commonly-used aspect ratios: 4:3, 4:3 Super
35mm, 1.66:1, 1.85:1 and 2.39:1. Use the aspect markers to make sure the subject is correctly framed and
within the appropriate safe area.
Aspect marker 2.39:1, gray (default)
1 Open the [Activate] submenu to activate the aspect
markers.
[Other Functions] > [Aspect Marker] > [Activate]
2 Select [On] and then press SET.
• To check the aspect marker on the shooting screen, press the
MENU button to close the menu. If necessary, press the MENU
button again to return to the menu and change the aspect
marker's settings.
To change the aspect marker's settings
1 Open the [Color] submenu to select the aspect marker's
color.
[Other Functions] > [Aspect Marker] > [Color]
2 Select [Black], [Gray] or [White] and then press SET.
3 Open the [Ratio] submenu to select the aspect ratio.
[Other Functions] > [Aspect Marker] > [Ratio]
4 Select the desired aspect ratio and then press SET.
NOTES
• If you set an assignable button to [Aspect Marker] (A 27), you can press the button to turn the aspect
marker on and off.
Aspect Markers
Aspect marker 4:3, white
[Other Functions]
[Aspect Marker]
[Activate]
[Off]
[Other Functions]
[Aspect Marker]
[Color] ..... [Gray]
[Ratio] ..... [2.39:1]
25
Advertisement
Table of Contents
