Of Programming Programming; Programming; Navigating; Gateway Touchpad - Honeywell LyricLCP300-L Installation And Reference Manual

Lyric Gateway Installation and Reference Guide
Mechanics of Programming Mechanics of Programming Mechanics of Programming Mechanics of Programming

Programming

Programming
Programming Programming
The Lyric Gateway is programmed via AlarmNet 360
numerous options for programming the Gateway, Sensors, Wireless Keys and Keypads and accessories. Refer to
the Lyric Gateway Quick Installation Guide (p/n 800-21668) for information regarding programming.

Navigating

Navigating Navigating Navigating
Gateway Gateway Touchp Gateway Gateway Touchp Touchpad Touchp ad ad ad
Gateway's touchpad can be used for Basic Security Functions. The touchpad provides a number of functions
and indicators. The System Status Shield is lit Green when the system is ready or flashes Red when it is not.
When the system is armed the System Status Shield is lit Red. Refer to the table below for additional indications
and functions. Additional functions are available via the AlarmNet 360, MyHome Gateway and Total Connect
Apps or the associated websites.
LYRIC LYRIC
LYRIC LYRIC

Gateway Menu Mode

Gateway Gateway Gateway Menu Mode Menu Mode Menu Mode
Entering the Master User Code or Installer Code +11 on the Gateway touchpad provides access to Menu Mode.
The system announces the menu options based on the code that was entered.
Code Entered Code Entered Code Entered Code Entered
Master User (1234)
Installer (4112)

Keypad Lockout

Keypad Lockout
Keypad Lockout Keypad Lockout
In the event that 24 numeric keys (0-9) have been entered within a 15-minute window and a valid command is
not executed, the system stops processing additional numeric key presses for a period of 15 minutes. Any
numerical keys entered during that period will be ignored. CID Code 461 Wrong Code Entry will be entered in
the Event Log and transmitted to the Central Station. When the 15-minute lockout window expires, a Restore
message is sent to the Central Station and entered into the Event Log.
gw_keypad-019-V0
™ ™ ™ ™
Gateway Gateway
Gateway Gateway
Menu Option (System Announcement Menu Option (System Menu Option (System Menu Option (System
Press 20 to delete all enrolled MyHome Gateway apps
Press 21 to enter MyHome Gateway app Enroll Mode
Press 31 to enter or exit Access Point (AP) mode
Press 41 to enter or exit WPS mode
Press 31 to enter Access Point mode
Press 41 to enter or exit WPS mode.
Press 51 to enter Go/No-Go Test mode
TM
using a smart (mobile) device or a laptop. There are
Key Key Key Key
System Status Shield System Status Shield System Status Shield System Status Shield – System status is
displayed when the shield is lit as follows:
Green (steady) – Ready to Arm and during
sensor enrollment from AlarmNet 360
Green (flashing) – Zone is faulted
Red (steady) – System is Armed
Red (slow flash) – Entry/Exit delay countdown
Red (rapid flash) – System is in Alarm
White (steady) – Waiting for User Code entry
ARMED Arm Gateway in Away mode (LED steady red
Away
when selected)
ARMED Arm Gateway in Home mode (LED steady red
Home
when selected)
Disarm Gateway (LED flashes green until code
Disarmed
is entered, then turns steady green)
Flashes red when an alert condition exists.
Alert
Select to hear condition
Cancel User Code entry or Emergency
Cancel (Flashes white during an emergency) and
silence beeping due to faults
Emergency
Activates Emergency keys
Fire key Fire key Fire key - - - - Initiates panic fire alarm within 5 Fire key
seconds of activation.
Police key - - - - Initiates panic police alarm within Police key
Police key Police key
5 seconds of activation
Medical key Medical key Medical key - - - - Initiates panic medical alarm Medical key
within 5 seconds of activation
Announcement Announcement) ) ) ) Announcement
- 14 -
Description Description Description Description