Zone Programming - Honeywell LyricLCP300-L Installation And Reference Manual

Programming Field Programming Field
Programming Field Programming Field
Burglary Bell Timeout
Fire Bell Timeout
System Operation
Quick Arm
Quick Exit
Restart Exit Time
Chime Mode
Force Bypass
Exit Warning
Display Exit Time
Power-Up In Previous
Auto Stay Arming
Arm Confirm
Reporter Reporter Reporter Reporter
Arm Away
Arm Stay
Disarm
Exit Error
Alarm Restore
Alarm Cancel
Test
Test Restore
Low Battery
Low Battery Restore
RF Low Battery
RF Low Battery Restore
Recent Closing
Event Log Full
Trouble
Trouble Restore
Bypass
Bypass Restore
AC Loss
AC Loss Restore
Log All Events
Log Alarm Events
Log Open/Close Events
Log Trouble Events
Log Non Security Events
Log Bypass Events

Zone Programming

Zone Programming
Zone Programming Zone Programming
The programmed defaults are shown. Refer to the Programming Field Explanations for additional information.
Zones 1-64 are RF Zones (Refer to "SENSORS" in AlarmNet 360)
Zones 65-68 are 5800 Garage Door Zones (Refer to "SENSORS" in AlarmNet 360)
Zones 131-162 are Keyfob Zones (Refer to "KEYFOBS" in AlarmNet 360)
Zones 280-291 are Temperature Zones (Refer to "SENSORS" in AlarmNet 360)
Zones 850-857 are Keypad Zones (Refer to "KEYPADS" in AlarmNet 360)
Zones 995, 996 and 999 are Panic Zones (Refer to "SENSORS" in AlarmNet 360)
Options Options
Options Options
No, 4 Minutes, 8 Minutes,12 12 Minutes, 16 Minutes,
No, 4 Minutes, 8 Minutes,12 12 Minutes, 16 Minutes,
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Not programmable (LCP300-L)
Yes, No (LCP300-LC)
Yes, No
Not programmable (LCP300-L)
Yes, No (LCP300-LC)
Yes, No
All RF, None, RF Keyfob, RF Keypad
Yes, No
Yes, No
Yes, No
Not programmable (LCP300-L)
Yes, No (LCP300-LC)
Yes, No
Yes, No
Not programmable (LCP300-L)
Yes, No (LCP300-LC)
Not programmable (LCP300-L)
Yes, No (LCP300-LC)
Yes, No
Yes, No
Yes, No
Yes, No
Not programmable (LCP300-L)
Yes, No (LCP300-LC)
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Lyric Gateway Installation and Reference Guide
Programming Defaults (Continued) Programming Defaults
Programming Defaults Programming Defaults
- 31 -
LCP300- - - - L L L L LCP300 LCP300 LCP300- - - - LC
LCP300 LCP300 LCP300 LCP300
Default Default Default Default
Default Default Default Default
4 Minutes 4 Minutes
4 Minutes 4 Minutes
Yes Yes
Yes Yes
Yes Yes
Yes No
No No
Yes
Yes
Yes Yes
Yes
Yes
Yes Yes
None RF Keyfob
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
LC
LC LC