Event Log; Contact Id Event Log Codes - Honeywell LyricLCP300-L Installation And Reference Manual

Lyric Gateway Installation and Reference Guide
System Operation (Continued) System Operation
System Operation System Operation

Event Log

Event Log Event Log Event Log
The Lyric Gateway Series event log is capable of recording and displaying up to 6,000 system events. These
events are stored locally in the Gateway, in chronological order, and transmitted to the Central Station. When
the maximum number of events is reached in the Event Log, the system will overwrite the oldest event first. The
type of events that can be recorded is selectable and is programmed in the System Type programming field.
The event log can be reviewed from the AN360 app's Installer Tools screen by selecting "Event Logs" or the
Installer Advanced screen by selecting "Event Log". Refer to the Lyric Gateway User Manual for additional
information. The Events and CID Codes displayed vary according to the options that are programmed. The
tables below provide definitions of the events/codes that may be transmitted to the Central Station and/or
displayed in the Gateway's Event Log.
NOTE: : : : In the unlikely condition that the backup battery becomes fully discharged when AC power is lost, any system activity NOTE
NOTE NOTE
performed after the low battery notification will not be saved in the event log. Additionally, the Gateway will revert to the
status condition as before the low battery notification.
CID Code CID Code
CID Code CID Code
110 Alarm, Fire
121 Alarm, Duress
122 Alarm, Silent
123 Alarm, Audible
131 Alarm, Perimeter
132 Alarm, Interior
134 Alarm, Entry/Exit
135 Alarm, Day/Night
137 Alarm, Tamper
145 Expansion Module Tamper
146 Silent Burglary
150 24-Hour Non-Burglary
162 Carbon Monoxide Detected
301 Trouble, AC Loss
302 Trouble, Low System Battery
305 Trouble, System Reset
308 System shutdown
316 System Tamper*
341 Trouble, Case Tamper
344 Trouble, RF Receiver Jam Detect
350 Long Range Radio Reset
353 Trouble, Long Range Radio Transmitter Fault
354 Failure to Communicate Event
373 Trouble, Fire Trouble
374 Trouble, Exit Error Alarm
380 Trouble, Sensor
381 Trouble, Loss of Supervision RF
383 Trouble, Sensor Tamper
384 RF Low Battery
401 Open/Close by User
403 Open/Close Automatic
406 Cancel
407 Remote Arm/Disarm
408 Quick Arm
441 Armed Stay
455 Auto-Arm Failed
459 Recent Close
461 Wrong Code Entry
570 Zone/Sensor Bypass
601 Manual Trigger Test Report
602 Periodic Test Report
606 Listen-in to follow
607 Walk Test
623 Event 90% Full
627 Program Mode Entry
628 Program Mode Exit
654 System Inactivity
655 Reset Master Code
* AlarmNet 360 generates a special comm. fail message (E316) if it does not hear from a unit within 15 minutes after a delayed alarm is
delivered. This message is meant to alert the Central Station that the system has been tampered with and may have been
compromised.
ID ® ® ® ® Event
Contact ID Contact Contact Contact ID ID Event Log Event Event
Definition Definition Definition Definition
- 24 -
Log Codes Log Log Codes Codes Codes
Event Log Display Event Log Display
Event Log Display Event Log Display
Fire
Duress
Silent
Audible
Perimeter
Interior
Entry/Exit
Day Night
Tamper
Expansion Module Tamper
Silent Burglary
24 Hour Non-Burglary
Carbon Monoxide Detected
AC Loss
Low system battery
System Reset
System shutdown
System Tamper
Cover Tamper
RF Jam Detect
Long Range Radio Reset
Comm. Trouble
Failure to Communicate Event
Fire trouble
Exit error alarm
Sensor trouble
Superv Loss-RF
Sensor Tamper
RF Low Battery
Arm Away/Disarmed
Automatic O/C (or Scheduled Arming)
Cancel
Remote Arm/Disarm
Quick arm
Arm Home/Disarmed
Auto-arm Failed
Recent Closing
Wrong Code Entry
Zone Bypass
Manual Trigger Test Report
Periodic test report
Listen-in to follow
Walk Test Mode
Event Log 90% Full
Program mode entry
Program mode exit
System Inactivity
User Code