Save To A Profile - ATEN VM6404H User Manual

Save to a Profile

The switch allows users to store up to 8 (VM6404H; numbered P1-P8) or 17
(VM6809H; numbered P1-P17) different connection profiles that can be saved
and recalled later.
The active Input-to-Output port connections on the LCD Main Screen is the
configuration saved to a profile. When a user loads a profile, the change is
immediate and the profile number is shown on the lower right corner of the
LCD screen.
To save a profile once the desired port connections are set, do the following:
1. Press the Menu pushbutton to access the Menu page, then 8 or Next to
navigate to the next pages. Press pushbutton 1 to open the Save to a Profile
page.
1: Save to a Profile
2. Play the Profile Schedule
2. On the page that opens, you are asked to give the profile a number. Use the
front panel number pushbuttons to select a profile number into which you
want to save the configuration.
Save to a Profile No. 1
In 1-4=P1-P4; Out 1-4=P5-8.
VM6404H Options are P1–P8 (when saving a profile via the LCD),
where:
Input port pushbuttons 1–4 correspond to Profile P1 to P4
Output port pushbuttons 1–4 correspond to Profile P5 to P8
VM6809H Options are P1–P17 (when saving a profile via the LCD),
where:
Input port pushbuttons 1–8 correspond to Profile P1 to P8
Output port pushbuttons 1–9 correspond to Profile P9 to P17
3. Press Enter to store the configuration – the LCD shows Profile Saved.
4. Press Menu to return to the Menu page,
5. Press Cancel to return to the previous step without saving.
Note: Access the Save to a Profile page quickly by pressing the Profile
pushbutton for longer than 3 seconds.
Chapter 3. Front Panel Configuration
:
Prev
35