Madsen Zodiac User Manual page 46

User Guide
Storing and handling
Temperature:
Relative humidity:
Air pressure:
Dimensions (HxWxD)
Stand-alone version:
PC-based version:
Probe dimensions (HxWxD)
Quick Check probe:
Diagnostic probe:
Weight
Stand-alone version:
PC-based version:
Optional features (Stand-alone)
Printer:
2 cc coupler
Calibration
Equipment should be calibrated regularly according to EN 60645-5 and ANSI S3.39
Essential performance
MADSEN Zodiac has no essential performance and accordingly, the applicable requirements are as stated in the following:
1. Impedance/admittance as defined by EN 61027 Type 1, ANSI S3.39 Type 1.
2. Basic safety as defined by IEC 60601-1.
All information required by IEC 60601-1-2:2007, #5.2.2.1-#5.2.2.10 is available in the MADSEN Zodiac User Guide.
Standards
Safety:
EMC:
Impedance/Admittance:
Power supply:
46
-20°C to +60°C (-4°F to +140°F)
< 90 %, non-condensing
500 hPa to 1060 hPa
190 mm x 248 mm x 261 mm (7.5" x 9.8" x 10.3")
100 mm x 240 mm x 240 mm (3.9" x 9.4" x 9.4")
28 mm x 22 mm x 100 mm (1.1" x 0.9" x 3.9")
10 mm x 10 mm x 25 mm (0.4" x 0.4" x 1.0")
2.65 kg/5.85 lb
1.65 kg/3.64 lb
Built-in printer. Prints 832 dot line/s on 112 mm paper width
IEC 60601-1, UL 2601-1, CAN/CSA - C22.2 NO 601.1-90
ANSI/AAMI ES60601-1 + AMD 1, CAN/CSA-C22.2 No. 60601-1
MADSEN Zodiac: EN 60601-1, Class II, externally powered, Type BF, IPX0
EN 60601-1-2
Clinical/Diagnostic: EN 60645-5 Type 1, ANSI S3.39 Type 1
Class I externally powered supply
Otometrics - MADSEN Zodiac