Madsen Zodiac User Manual page 8

User Guide
The first time you switch on the device
Note
The first time you switch on the device, leave it turned on for at least an hour to let the internal clock battery
•
charge.
The first time you switch on the device, or if the device has been switched off for more than two weeks, the internal clock
runs out of power. When you start up the device, you will be prompted to set the time manually.
• Set the date and time as required on the device.
• Alternatively, you can connect to OTOsuite where it will be done automatically.
Switching MADSEN Zodiac on and off
1. To switch on Zodiac, press the
– In the stand-alone versions of the device, the display
and some function buttons light up.
2. To switch off Zodiac, press the
If needed, switch off the mains supply and disconnect the
power supply from the mains outlet.
4.2 Connecting to the PC
To connect Zodiac to the PC, you must install OTOsuite on the PC.
For instructions on installing OTOsuite, see the OTOsuite Installation Manual, which you can find on the OTOsuite install-
ation medium (disk or memory stick).
Caution
•
4.3 The built-in printer
The built-in printer, which is optional, is placed on the back of Zodiac.
The printer is controlled from the front panel of the device.
1. To open the printer cover, press the printer cover button.
8
On/Off
On/Off
Use only the USB cable supplied with Zodiac.
Connect the USB cable from the USB socket on the back of the device to a USB socket on the PC. The OTO-
suite Immittance software module automatically detects the device.
button.
button.
Otometrics - MADSEN Zodiac