Madsen Zodiac User Manual page 25

• The diagnostic probe: Press the
button on the control pad.
• The Quick Check probe: Press the
The probe lights up in the ear color to indicate that it is activated.
Starting the test
1. Press the
ted.
2. Place the probe in the patient's ear.
3. Ask the patient to sit very still and quiet during the test, without moving
head or jaw.
Quick Check
– The test starts automatically when seal is achieved in the ear canal.
Diagnostic probe:
– Press the
on the probe control pad on the shoulder strap.
With the diagnostic probe you can also use automatic start: Press
the
Stopping the test
1. If the patient is troubled by the test, press the
device or the
shoulder strap.
2. The test is interrupted and the pump pressure is relieved immediately.
Already measured results are kept when a measurement is stopped.
Making additional tympanograms
1. To make a new sweep, press the
If you wish to overwrite a tympanogram, use the dial or the soft-buttons
curve you wish to overwrite.
Otometrics - MADSEN Zodiac
Ear
Ear
Tymp button. Make sure that only the
probe:
Start/Stop
button on the device or the
Start/Stop
button before placing the probe in the patient's ear.
Start/Stop
button on the probe control pad on the
Start/Stop
Start/Stop
button on Zodiac or the
button on the probe.
Tymp button is selec-
Start/Stop
Start/Stop button on the
button.
button
Previous Curve Next Curve
or
User Guide
to select the
25