Other References; Manufacturer - Madsen Zodiac User Manual

22. To comply with IEC 60601-1(3rd) computer and printer must be placed out of reach of the client, i.e. not closer than
approx. 1.5 meters/5 ft.
23. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
16

Other references

For more information, see the online Help in OTOsuite, which contains detailed reference information about MADSEN
Zodiac and the OTOsuite modules.
For instructions on installing OTOsuite, see the OTOsuite Installation Manual, which you can find on the OTOsuite install-
ation medium (disk or memory stick).
You can find in-depth information about using MADSEN Zodiac in the MADSEN Zodiac Reference Manual.
Troubleshooting examples are described in the MADSEN Zodiac Reference Manual.
17

Manufacturer

GN Otometrics A/S
Hoerskaetten 9, 2630 Taastrup
Denmark
(
+45 45 75 55 55
7
+45 45 75 55 59
www.otometrics.com
17.1 Responsibility of the manufacturer
The manufacturer is to be considered responsible for effects on safety, reliability, and performance of the equipment only
if:
• All assembly operations, extensions, re-adjustments, modifications or repairs are carried out by the equipment man-
ufacturer or personnel authorized by the manufacturer.
• The electrical installation to which the equipment is connected complies with EN/IEC requirements.
• The equipment is used in accordance with the instructions for use.
Otometrics - MADSEN Zodiac
User Guide
53