Table of Contents
Advertisement
User Guide
On-screen selections
7
The Zodiac menu
If you use a stand-alone version of Zodiac, you can use the function-specific buttons to activate the most commonly used
functions for testing, changing test settings, and managing test results.
If you need to make further changes to a test setup, or other more specific functions, press
choices.
The menu system
Menu
Press the
columns of menu items.
•
The left-hand column shows a list of predefined test protocols.
•
The center column shows the test settings.
•
The right-hand column shows the values.
18
Soft-button
Menu
Arrow Up
Arrow Down
Dial
button to enter the menu system. You will see three
Press this button to select the current function of the soft-button as shown
on the screen just above the soft-button.
•
Menu:
Press the soft-button below the column you wish to go to.
•
Tympanometry:
Press to toggle between tympanometric curves and to change curve
type.
Press this button to display the menu where you can select test setups,
change test settings, create user tests, select print output, and select func-
tions for service and calibration.
This function is enabled when you activate the Menu function
•
Press this button until you highlight the desired area on the screen.
This function is enabled when you activate the Menu function.
•
Press this button until you highlight the desired area on the screen.
In addition to the various measurement functions, you can use the dial to
scroll between menu items on the screen.
Menu
Special
or
for more
Otometrics - MADSEN Zodiac
Hide quick links:
Advertisement
Table of Contents
