Madsen Zodiac User Manual page 17

Sequence testing
Seq.
testing)
Running tests
Start/Stop
Dial
Ear
Delete
Otometrics - MADSEN Zodiac
(automatic sequence
This function allows you to combine multiple measurements and run them
in an automated sequence.
Press this button to select automatic sequence testing. The buttons cor-
responding to the tests and test functions included in the sequence light up
on the device, e.g. Tympanometry + Ipsi and Contra Reflex Thresholds at
several frequencies.
Start/Stop
When you press the
ted for the sequence are performed.
You can adjust any settings related to the tests included in the sequence.
Diagnostic sequence
Tympanometry + Reflex Threshold (+ Reflex Decay, if selected from the
tings
menu).
Screening sequence
Tympanometry + Reflex Screening.
This button is placed both on the device and on the diagnostic probe
shoulder strap.
This button is lit while a test is running.
• Press this button to perform a tympanometric measurement, to start
reflex tests, and to present stimuli for manual reflex testing.
• During a test, press this button to stop the test.
Auto-start
Press this button to activate
in the patient's ear.
This button is disabled when you use the Quick Check probe, which always
Auto start on seal
uses .
Turn the dial to adjust pump pressure and to control the stimulus level.
This button is located both on the device and on the probes.
Press this button to toggle the ear selection associated with the current
measurement.The button lights up in the color of the selected ear.
Press this button to delete the selected measurement curve.
button, all functions that have been selec-
Auto start on seal
before you place the probe
User Guide
Set-
17