Default Configuration; Reboot Device - Q-See QSTC211 User Manual

QSTC201/211 IP-CAMERA USER MANUAL
address" can't operate at the same time.
Fig 5-24 advanced configuration—security configuration interface

5.8.3 Default configuration

Enter into advanced configuration—default configuration refer to Figure 5-25:
Fig 5-25 advanced configuration—default configuration interface
Click "Load default" button to restore all system settings to original value, except
for IP address.

5.8.4 Reboot device

Enter into advanced configuration—reboot device refer to Figure 5-26:
Fig 5-26 advanced configuration—reboot device interface
Click "Reboot device" button to reboot the device.
46