Advanced Configuration; Upgrade; Security Configuration - Q-See QSTC211 User Manual

QSTC201/211 IP-CAMERA USER MANUAL
Fig 5-22 Notification configuration—mail configuration interface

5.8 Advanced configuration

Advanced configuration includes
configuration and default configuration

5.8.1 Upgrade

Enter into advanced configuration—upgrade, refer to Figure 5-23:
1. Click "Browse" button to select the save path of the upgrade file
2. Click "upgrade server firmware" button, start upgrading the application
program
3. The device will restart automatically
Notice: user can't disconnect from PC or close the IP-CAM during upgrade
Fig 5-23 advanced configuration—upgrade interface

5.8.2 Security configuration

Enter into advanced configuration—security configuration, refer to Figure 5-24:
1. Select "Enable IP address" check box, select "Deny the following IP address",
input IP address in the IP address list box and click "Add" button, this IP address
will display in the list box; the step of "Allow the following IP address " is the
same as "Deny the following IP address".
2. Check the IP address which needs to be deleted in the IP address list box and
click "delete" button to delete the IP address.
3. Click "save" button to save the above setting.
Note: "Allow the following IP address" and "Deny the following IP
three submenus: upgrade, security
45