Date & Time Configuration - Q-See QSTC211 User Manual

QSTC201/211 IP-CAMERA USER MANUAL
Fig 5-1 system configuration—server basic configuration interface
5.2.2 Date & Time configuration
Setting steps:
1. Enter into "system configuration" –"Date & Time" refer to Figure 5-2:
2. Choose the right "Time Zone" according to user's location.
3. Select "Modify Time ", user can setup time by select the "Synchronize with
NTP Server" or "Set manually". Select "Set manually", user can self-define time;
tick off "PC time" check box, the manual setup time will be the same as the PC
time.
4. Press the "Save" button to save the settings.
Fig 5-2 system configuration—date & time interface
27