Q-See QSTC211 User Manual page 43

QSTC201/211 IP-CAMERA USER MANUAL
device on this PC in network only. If the MAC address was
""00:00:00:00:00:00" it can be connected to any computers.
5. Click "OK" button, new added user will be displayed in the user list.
Modify user:
1. Select the user who needs to modify password and physical address in the
user configuration list box.
2. Click "Modify" button, "Modify user" dialog box pops up, refer to Figure 5-21:
Fig 5-21 Modify user dialog box
3. Input original password of this user in the "change password" text box
4. Input new password in the "New password" and "Confirmation" text box
5. Input computer's physical address from which user accesses the server in the
"User PC MAC" text box
6. Click "OK" button, to complete modification of user's password and binding
MAC address.
Delete user:
1. Select the user which needs to be deleted in the user configuration list box.
2. Click "Delete" button, a confirm dialog box pops up, click "OK" to delete the
user.
Note: The default super administrator can not be deleted.
43