Ddns Configuration - Q-See QSTC211 User Manual

Q-see - digital peripheral solutions security camera user manual

Hide thumbs Also See for QSTC211:

Table of Contents

Enlarged version

QSTC201/211 IP-CAMERA USER MANUAL

5-17:

2. Select "wireless switch", click "refresh" button, available wireless networks

found by device will display in the "Available network" list box on the right. User

can setup relative parameters according to available wireless networks.

3. SSID, channel, authentication mode and encrypt type, password are the same

as the user's wireless router settings.

4. Select "Obtain IP address automatically", the device will distribute IP address,

subnet mask, gateway IP and DNS service; select "use the following IP address",

user should manually input the IP address, subnet mask, gateway IP and DNS

service.

Fig 5-17 network configuration-- wireless configuration interface

5.5.4 DDNS configuration

Enter into "Network configuration"-- "DDNS configuration" refer to Figure 5-18:

Note: The service of user selecting domain name is that video surveillance

server bands one domain name. First, users should register user name and

password to log on the website of service supplier, and then apply for a domain

name online for the server. After that, users can visit the server through inputting

the domain name at Internet Explorer terminal.

Table of Contents

Qstc201