Image Configuration - Q-See QSTC211 User Manual

QSTC201/211 IP-CAMERA USER MANUAL
5. Press the "Save" button to save the settings.
Fig 5-4 channel configuration—basic configuration interface

5.3.2 Image configuration

1. Enter into "Channel configuration"—"Image configuration" refer to Figure 5-5:
2. Select the channel to be setup using the "Channel Number" list box.
3. Press "Load Default" button to reset the default value of brightness, contrast,
hue, saturation.
4. Move the scroll bar to set the value of the brightness, contrast, hue,
saturation.
5. Press the "Save" button to save the settings.
Fig 5-5 channel configuration—image configuration interface
29