Alarm Out; Network Configuration; Basic Configuration - Q-See QSTC211 User Manual

QSTC201/211 IP-CAMERA USER MANUAL

5.4.7 Alarm out

1. Enter into "Alarm configuration"— "Alarm output" refer to Figure 5-13:
2. Select the alarm out number, alarm holding time and alarm name on the
"Alarm out", "Alarm holding time" and "Name" pull down list respectively.
3. Press the "Save" button to save the settings.
Fig 5-13 alarm configuration—alarm out
Please refer to the following table for parameters and instructions of alarm out.

5.5 Network configuration

Network configuration includes four submenus: basic configuration, IP
configuration, wireless configuration and DDNS configuration.

5.5.1 Basic configuration

1. Enter into "Network configuration"--"Basic configuration", refer to Figure 5-14:
2. Input port number for IE access in the "HTTP Port" textbox.
3. Input the port number for audio & video transmission in the "Data Port"
textbox.
Fig 5-14 network configuration-- basic configuration interface
36