Table of Contents
Advertisement
If the measurement exceeds the display capacity (4000A), the device dis-
plays 3999, blinking.
If the measurement is too low (see § 3.2), the device displays dashes.
If the edges of the signal are too steep, or its peak factor is too large, the
device displays OL.
3.2.3
Freezing the Measurement
If you want to freeze the display of a measurement, press the HOLD
button. The HOLD symbol is displayed.
The device continues to make measurements, but the display is frozen.
To release it, press the HOLD button again.
Digital Flexprobe
®
HOLD
Models 400D & 4000D
A
A
A
A
11
Advertisement
Table of Contents
