V-650/660/670 Spectrophotometers: Overview; Overview - Jasco V-630 Hardware Manual

4.2 V-650/660/670 Spectrophotometers: Overview

4.2.1 Overview

Sample compartment
Fixing screws
Name
Sample compartment
Fixing screws
"Power" switch
"START" switch
Light source lid
Figure 4.3 V-650/660/670 appearance
Function
Slide the lid back to open it. The single position cell holder (the
standard cell holder) is installed. The cell holder located toward
the front is the sample cell holder, and the one located toward the
rear is the reference cell holder.
Fixes the standard cell holder in position. Loosen the two fixing
screws, pull the standard cell holder toward you a little and lift to
remove it.
When the switch is pressed on, the power supply is turned on.
Switch to start measurement. The lamp flashes during
measurement.
The light source is housed here.
19
Light source lid
"START" switch
"Power" switch